What is the function of the valve body?

The valve body is the main component of the valve body, and there are different mechanical manufacturing methods according to the pressure level.

The valve body is the main component of the valve body, and there are different mechanical manufacturing methods according to the pressure level. For example: casting, forging, etc. The valve body of medium and low pressure specifications is usually produced by casting process. The valve body of medium and high pressure specifications is produced by forging process. The definition of "valve" is a device used to control the direction, pressure and flow of fluid in a fluid system. Valve is the pipeline and equipment in the medium (liquid, gas, powder) flow or stop, and can control the flow of the device. According to different process media, the material of the valve body is different metal materials.

The valve body is the valve core part of the valve body, and the commonly used materials are ceramic valve core and copper valve core. Mainly used for water valve and air valve, used to block water flow or airflow in the valve. Overall replacement is common. The choice is to buy a valve that can replace the valve core separately. You don't need to take off the valve and change the valve core directly.

Function of valve body:
 

1. The valve body mainly refers to the valve core part of the valve. Commonly used materials are ceramic spool and copper spool.

2. The main function of the valve body: there are water valves and air valves in the valve to block water flow or airflow.

3. The use and replacement of the valve body: The overall replacement is more common. The choice is to buy a valve that can replace the valve core separately. Instead of removing the valve, replace the valve core directly.

Inlet valve more than the cause of water

1. The inlet valve is stuck

Check whether the float or float of the inlet valve is stuck. The float (float) can be pulled up and down by hand, and can move up and down smoothly under normal circumstances.

2. There is foreign matter in the valve body

Foreign matter in the inlet valve will cause the needle valve pressure chamber at the top of the inlet valve to fail to form a water stop. In this case, please ask a professional to repair or purchase a replacement.

3. Floating fault

Check whether the float of the inlet valve is stuck or disturbed by something. Normally, the buoy is free to move up and down.

4. Internal damage of valve body

There is a problem inside the inlet valve, such as sand or small debris in the inlet valve body. In this case, you can only buy a replacement.